[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.59+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #1047 Sun Oct 29 11:47:10 GMT 2017
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] OF: fdt:Machine model: Raspberry Pi Zero Rev 1.3
[    0.000000] cma: Reserved 8 MiB at 0x1b400000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 114688
[    0.000000] free_area_init_node: node 0, pgdat c0914e10, node_mem_map db010000
[    0.000000]   Normal zone: 1008 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 114688 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113680
[    0.000000] Kernel command line: bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=7395aaab-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 435944K/458752K available (5950K kernel code, 491K rwdata, 1948K rodata, 396K init, 725K bss, 14616K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xdc800000 - 0xff800000   ( 560 MB)
                   lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
                   modules : 0xbf000000 - 0xc0000000   (  16 MB)
                     .text : 0xc0008000 - 0xc05d7a48   (5951 kB)
                     .init : 0xc0841000 - 0xc08a4000   ( 396 kB)
                     .data : 0xc08a4000 - 0xc091ef48   ( 492 kB)
                      .bss : 0xc091ef48 - 0xc09d4648   ( 726 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000031] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000077] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000176] bcm2835: system timer (irq = 27)
[    0.000657] Console: colour dummy device 80x30
[    0.001396] console [tty1] enabled
[    0.001451] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[    0.060364] pid_max: default: 32768 minimum: 301
[    0.060829] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.060900] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.062196] Disabling memory control group subsystem
[    0.062407] CPU: Testing write buffer coherency: ok
[    0.062510] ftrace: allocating 21715 entries in 64 pages
[    0.180830] Setting up static identity map for 0x8200 - 0x8238
[    0.182901] devtmpfs: initialized
[    0.192700] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    0.193228] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.193330] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.194652] pinctrl core: initialized pinctrl subsystem
[    0.196160] NET: Registered protocol family 16
[    0.198606] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.208215] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.208308] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.208450] Serial: AMBA PL011 UART driver
[    0.211402] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[    0.263227] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80d000, dmachans=0x1
[    0.266032] SCSI subsystem initialized
[    0.266360] usbcore: registered new interface driver usbfs
[    0.266527] usbcore: registered new interface driver hub
[    0.266766] usbcore: registered new device driver usb
[    0.270886] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-10-24 17:09
[    0.272819] clocksource: Switched to clocksource timer
[    0.327020] VFS: Disk quotas dquot_6.6.0
[    0.327221] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.327594] FS-Cache: Loaded
[    0.327985] CacheFiles: Loaded
[    0.347394] NET: Registered protocol family 2
[    0.348857] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.349018] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.349152] TCP: Hash tables configured (established 4096 bind 4096)
[    0.349287] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.349358] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.349708] NET: Registered protocol family 1
[    0.350524] RPC: Registered named UNIX socket transport module.
[    0.350600] RPC: Registered udp transport module.
[    0.350640] RPC: Registered tcp transport module.
[    0.350677] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.351819] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
[    0.354500] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.375260] FS-Cache: Netfs 'nfs' registered for caching
[    0.377120] NFS: Registering the id_resolver key type
[    0.377230] Key type id_resolver registered
[    0.377273] Key type id_legacy registered
[    0.381780] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.382251] io scheduler noop registered
[    0.382316] io scheduler deadline registered (default)
[    0.382933] io scheduler cfq registered
[    0.388803] BCM2708FB: allocated DMA memory 5b500000
[    0.388936] BCM2708FB: allocated DMA channel 0 @ dc80d000
[    0.397256] Console: switching to colour frame buffer device 82x26
[    0.407729] bcm2835-rng 20104000.rng: hwrng registered
[    0.410563] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    0.416975] vc-sm: Videocore shared memory driver
[    0.444555] brd: module loaded
[    0.459892] loop: module loaded
[    0.462630] Loading iSCSI transport class v2.0-870.
[    0.466281] usbcore: registered new interface driver smsc95xx
[    0.469010] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.699905] Core Release: 2.80a
[    0.702567] Setting default values for core params
[    0.705273] Finished setting default values for core params
[    0.908415] Using Buffer DMA mode
[    0.911047] Periodic Transfer Interrupt Enhancement - disabled
[    0.913659] Multiprocessor Interrupt Enhancement - disabled
[    0.916299] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.918965] Dedicated Tx FIFOs mode
[    0.922180] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xdb514000 dma = 0x5b514000 len=9024
[    0.927829] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    0.940951] dwc_otg: Microframe scheduler enabled
[    0.941088] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc0451694
[    0.943749] WARN::hcd_init_fiq:460: FIQ ASM at 0xc0451970 length 36
[    0.946352] WARN::hcd_init_fiq:486: MPHI regs_base at 0xdc8a5000
[    0.949118] dwc_otg 20980000.usb: DWC OTG Controller
[    0.951825] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[    0.954691] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[    0.957373] Init: Port Power? op_state=1
[    0.959944] Init: Power Port (0)
[    0.962741] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.965472] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.968116] usb usb1: Product: DWC OTG Controller
[    0.970678] usb usb1: Manufacturer: Linux 4.9.59+ dwc_otg_hcd
[    0.973312] usb usb1: SerialNumber: 20980000.usb
[    0.977083] hub 1-0:1.0: USB hub found
[    0.979686] hub 1-0:1.0: 1 port detected
[    0.983127] dwc_otg: FIQ enabled
[    0.983138] dwc_otg: NAK holdoff enabled
[    0.983144] dwc_otg: FIQ split-transaction FSM enabled
[    0.983165] Module dwc_common_port init
[    0.983704] usbcore: registered new interface driver usb-storage
[    0.986697] mousedev: PS/2 mouse device common for all mice
[    0.990893] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.994155] bcm2835-cpufreq: min=700000 max=1000000
[    0.997431] sdhci: Secure Digital Host Controller Interface driver
[    1.000115] sdhci: Copyright(c) Pierre Ossman
[    1.003273] sdhost-bcm2835 20202000.sdhost: could not get clk, deferring probe
[    1.008512] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
[    1.011501] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.015283] ledtrig-cpu: registered to indicate activity on CPUs
[    1.018343] hidraw: raw HID events driver (C) Jiri Kosina
[    1.021429] usbcore: registered new interface driver usbhid
[    1.024330] usbhid: USB HID core driver
[    1.028353] vchiq: vchiq_init_state: slot_zero = 0xdb580000, is_master = 0
[    1.033188] [vc_sm_connected_init]: start
[    1.043689] [vc_sm_connected_init]: end - returning 0
[    1.047086] Initializing XFRM netlink socket
[    1.049941] NET: Registered protocol family 17
[    1.052974] Key type dns_resolver registered
[    1.057476] registered taskstats version 1
[    1.067791] uart-pl011 20201000.serial: cts_event_workaround enabled
[    1.070916] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[    1.902404] console [ttyAMA0] enabled
[    1.911514] sdhost: log_buf @ db513000 (5b513000)
[    1.992903] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.003877] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[    2.012596] mmc-bcm2835 20300000.mmc: DMA channel allocated
[    2.043477] Indeed it is in host mode hprt0 = 00021501
[    2.072830] random: fast init done
[    2.144205] of_cfs_init
[    2.149505] of_cfs_init: OK
[    2.160777] Waiting for root device PARTUUID=7395aaab-02...
[    2.233580] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.254801] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.275572] mmc0: new high speed SDHC card at address e624
[    2.288815] Indeed it is in host mode hprt0 = 00001101
[    2.362674] mmcblk0: mmc0:e624 SU32G 29.7 GiB
[    2.380498]  mmcblk0: p1 p2
[    2.412898] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    2.423215] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    2.439181] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    2.453835] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    2.483864] mmc1: Controller never released inhibit bit(s).
[    2.564577] usb 1-1: New USB device found, idVendor=22b8, idProduct=2e82
[    2.574655] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.585001] usb 1-1: Product: Moto G 2014
[    2.592114] usb 1-1: Manufacturer: motorola
[    2.599412] usb 1-1: SerialNumber: ZX1D224W7T
[    2.609475] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    2.624852] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    2.651785] mmc1: Controller never released inhibit bit(s).
[    2.667817] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    2.683465] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    2.699512] mmc-bcm2835 20300000.mmc: no support for card's volts
[    2.709206] mmc1: error -22 whilst initialising SDIO card
[    2.728262] mmc1: Controller never released inhibit bit(s).
[    2.824225] EXT4-fs (mmcblk0p2): recovery complete
[    2.840184] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.854831] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.877881] devtmpfs: mounted
[    2.885562] Freeing unused kernel memory: 396K
[    2.893369] This architecture does not have kernel memory protection.
[    3.475601] systemd[1]: System time before build time, advancing clock.
[    3.640580] NET: Registered protocol family 10
[    3.672443] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.727374] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.756674] systemd[1]: Detected architecture arm.
[    3.779601] systemd[1]: Set hostname to <zerophone>.
[    4.085496] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    4.100956] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    4.127759] mmc1: Controller never released inhibit bit(s).
[    4.195529] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    4.211261] mmc-bcm2835 20300000.mmc: no support for card's volts
[    4.220776] mmc1: error -22 whilst initialising SDIO card
[    4.239726] mmc1: Controller never released inhibit bit(s).
[    4.297231] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    4.312931] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    4.338851] mmc1: Controller never released inhibit bit(s).
[    4.375360] uart-pl011 20201000.serial: no DMA platform data
[    5.051330] random: crng init done
[    5.296427] systemd[1]: Created slice System Slice.
[    5.312035] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.328917] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    5.344713] systemd[1]: Listening on Journal Socket.
[    5.367161] systemd[1]: Starting Set the console keyboard layout...
[    5.401306] systemd[1]: Created slice User and Session Slice.
[    5.424288] systemd[1]: Reached target Slices.
[    5.797359] i2c /dev entries driver
[    5.845525] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    5.845541] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    5.856707] mmc1: Controller never released inhibit bit(s).
[    5.931172] mmc1: Controller never released inhibit bit(s).
[    5.931212] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    7.545696] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    7.545712] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    7.556891] mmc1: Controller never released inhibit bit(s).
[    7.671081] mmc1: Controller never released inhibit bit(s).
[    7.671123] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    9.028770] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    9.028796] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    9.041243] mmc1: Controller never released inhibit bit(s).
[    9.215715] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    9.215742] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    9.226981] mmc1: Controller never released inhibit bit(s).
[    9.277424] mmc-bcm2835 20300000.mmc: no support for card's volts
[    9.277452] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    9.277477] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    9.277511] mmc1: error -22 whilst initialising SDIO card
[    9.287692] mmc1: Controller never released inhibit bit(s).
[    9.327906] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    9.327928] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[    9.338119] mmc1: Controller never released inhibit bit(s).
[   10.628794] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   10.641248] mmc1: Controller never released inhibit bit(s).
[   10.745600] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   10.745628] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   10.756868] mmc1: Controller never released inhibit bit(s).
[   10.777714] mmc-bcm2835 20300000.mmc: no support for card's volts
[   10.777747] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   10.777772] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   10.777803] mmc1: error -22 whilst initialising SDIO card
[   10.787981] mmc1: Controller never released inhibit bit(s).
[   10.814102] mmc-bcm2835 20300000.mmc: no support for card's volts
[   10.814157] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   10.814178] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   10.814192] mmc1: error -22 whilst initialising MMC card
[   11.913125] mmc1: Controller never released inhibit bit(s).
[   12.125950] mmc1: Controller never released inhibit bit(s).
[   12.126002] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   12.205478] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   12.205505] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   12.216683] mmc1: Controller never released inhibit bit(s).
[   12.237478] mmc-bcm2835 20300000.mmc: no support for card's volts
[   12.237523] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   12.237539] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   12.237553] mmc1: error -22 whilst initialising SDIO card
[   12.247729] mmc1: Controller never released inhibit bit(s).
[   12.269649] mmc-bcm2835 20300000.mmc: no support for card's volts
[   12.269674] mmc1: error -22 whilst initialising MMC card
[   12.269697] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   12.269713] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   13.353132] mmc1: Controller never released inhibit bit(s).
[   13.468039] mmc1: Controller never released inhibit bit(s).
[   13.468085] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   13.548812] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   13.561269] mmc1: Controller never released inhibit bit(s).
[   13.604523] mmc1: Controller never released inhibit bit(s).
[   13.604572] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   13.685483] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   13.685512] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   13.696690] mmc1: Controller never released inhibit bit(s).
[   13.717471] mmc-bcm2835 20300000.mmc: no support for card's volts
[   13.717501] mmc1: error -22 whilst initialising SDIO card
[   13.717526] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   13.727709] mmc1: Controller never released inhibit bit(s).
[   13.757657] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   13.757679] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   13.767856] mmc1: Controller never released inhibit bit(s).
[   15.045331] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   15.045356] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   15.056780] mmc1: Controller never released inhibit bit(s).
[   15.113674] mmc1: Controller never released inhibit bit(s).
[   15.113726] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   15.185602] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   15.185629] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   15.196865] mmc1: Controller never released inhibit bit(s).
[   15.240045] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   15.240071] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   15.250263] mmc1: Controller never released inhibit bit(s).
[   16.623985] mmc1: Controller never released inhibit bit(s).
[   16.624034] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   16.709236] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   16.721914] mmc1: Controller never released inhibit bit(s).
[   16.761296] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   16.761321] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   16.771513] mmc1: Controller never released inhibit bit(s).
[   18.113799] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   18.123986] mmc1: Controller never released inhibit bit(s).
[   18.195305] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   18.195329] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   18.206764] mmc1: Controller never released inhibit bit(s).
[   18.251479] mmc1: Controller never released inhibit bit(s).
[   18.251530] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   19.443246] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   19.443276] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   19.453485] mmc1: Controller never released inhibit bit(s).
[   19.538815] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   19.538839] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   19.551569] mmc1: Controller never released inhibit bit(s).
[   19.591210] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   19.591236] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   19.601592] mmc1: Controller never released inhibit bit(s).
[   19.685624] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   19.685651] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   19.697039] mmc1: Controller never released inhibit bit(s).
[   19.740212] mmc-bcm2835 20300000.mmc: no support for card's volts
[   19.740241] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   19.740267] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   19.740298] mmc1: error -22 whilst initialising SDIO card
[   19.750478] mmc1: Controller never released inhibit bit(s).
[   19.782985] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   19.793179] mmc1: Controller never released inhibit bit(s).
[   21.115339] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   21.115364] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   21.126765] mmc1: Controller never released inhibit bit(s).
[   21.171214] mmc1: Controller never released inhibit bit(s).
[   21.171261] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   21.255636] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   21.255661] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   21.266918] mmc1: Controller never released inhibit bit(s).
[   22.656025] mmc1: Controller never released inhibit bit(s).
[   22.656073] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   22.735442] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   22.735468] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   22.746651] mmc1: Controller never released inhibit bit(s).
[   22.780902] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   22.780927] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   22.792603] mmc1: Controller never released inhibit bit(s).
[   22.823940] mmc-bcm2835 20300000.mmc: no support for card's volts
[   22.823981] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   22.823997] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   22.824012] mmc1: error -22 whilst initialising MMC card
[   23.913154] mmc1: Controller never released inhibit bit(s).
[   24.215684] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   24.215708] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   24.226884] mmc1: Controller never released inhibit bit(s).
[   24.294039] mmc-bcm2835 20300000.mmc: no support for card's volts
[   24.294076] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   24.294092] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   24.294107] mmc1: error -22 whilst initialising MMC card
[   25.433134] mmc1: Controller never released inhibit bit(s).
[   25.629028] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   25.629053] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   25.641493] mmc1: Controller never released inhibit bit(s).
[   25.682365] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   25.682390] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   25.682430] mmc-bcm2835 20300000.mmc: no support for card's volts
[   25.682444] mmc1: error -22 whilst initialising MMC card
[   25.753172] mmc1: Controller never released inhibit bit(s).
[   25.784261] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   25.784287] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   25.796767] mmc1: Controller never released inhibit bit(s).
[   25.848047] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   25.848072] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   25.858263] mmc1: Controller never released inhibit bit(s).
[   27.198895] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   27.198925] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   27.211367] mmc1: Controller never released inhibit bit(s).
[   27.221879] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   27.253298] mmc1: Controller never released inhibit bit(s).
[   27.253344] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   27.355662] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   27.355687] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   27.366898] mmc1: Controller never released inhibit bit(s).
[   27.428893] mmc1: Controller never released inhibit bit(s).
[   27.428945] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   27.807255] systemd-journald[114]: Received request to flush runtime journal from PID 1
[   28.858112] mmc1: Controller never released inhibit bit(s).
[   28.858161] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   28.955531] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   28.955556] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   28.966731] mmc1: Controller never released inhibit bit(s).
[   29.044802] mmc1: Controller never released inhibit bit(s).
[   29.044852] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   29.075602] mmc-bcm2835 20300000.mmc: no support for card's volts
[   29.075631] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   29.075653] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   29.075686] mmc1: error -22 whilst initialising MMC card
[   29.853106] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
[   30.153164] mmc1: Controller never released inhibit bit(s).
[   30.338577] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   30.338602] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   30.350928] mmc1: Controller never released inhibit bit(s).
[   30.390517] mmc1: Controller never released inhibit bit(s).
[   30.390568] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   30.465522] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   30.465550] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   30.476727] mmc1: Controller never released inhibit bit(s).
[   30.497604] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   30.497777] mmc-bcm2835 20300000.mmc: no support for card's volts
[   30.497796] mmc1: error -22 whilst initialising SDIO card
[   30.507974] mmc1: Controller never released inhibit bit(s).
[   30.530223] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   30.530247] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   30.540426] mmc1: Controller never released inhibit bit(s).
[   31.980119] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   31.980147] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   31.980190] mmc-bcm2835 20300000.mmc: no support for card's volts
[   31.980207] mmc1: error -22 whilst initialising MMC card
[   32.043152] mmc1: Controller never released inhibit bit(s).
[   32.174531] mmc1: Controller never released inhibit bit(s).
[   32.174583] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   33.559814] mmc1: Controller never released inhibit bit(s).
[   33.559860] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   33.655647] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   33.655676] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   33.666911] mmc1: Controller never released inhibit bit(s).
[   33.744843] mmc1: Controller never released inhibit bit(s).
[   33.744890] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   35.055953] mmc1: Controller never released inhibit bit(s).
[   35.056003] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   35.135621] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   35.135647] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   35.146909] mmc1: Controller never released inhibit bit(s).
[   35.180125] mmc-bcm2835 20300000.mmc: no support for card's volts
[   35.180154] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   35.180182] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   35.180213] mmc1: error -22 whilst initialising SDIO card
[   35.190391] mmc1: Controller never released inhibit bit(s).
[   35.220337] mmc1: Controller never released inhibit bit(s).
[   35.220385] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   38.025661] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   38.025689] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   38.036932] mmc1: Controller never released inhibit bit(s).
[   38.166305] mmc1: Controller never released inhibit bit(s).
[   38.166343] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   39.515328] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   39.526489] mmc1: Controller never released inhibit bit(s).
[   39.578712] mmc1: Controller never released inhibit bit(s).
[   39.578748] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   39.665455] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   39.665475] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   39.676624] mmc1: Controller never released inhibit bit(s).
[   39.709145] mmc-bcm2835 20300000.mmc: no support for card's volts
[   39.709166] mmc1: error -22 whilst initialising SDIO card
[   39.719276] mmc1: Controller never released inhibit bit(s).
[   39.719304] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   39.757661] mmc-bcm2835 20300000.mmc: no support for card's volts
[   39.757684] mmc1: error -22 whilst initialising MMC card
[   39.757712] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   39.757725] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   39.803070] Adding 102396k swap on /var/swap.  Priority:-1 extents:1 across:102396k SSFS
[   40.873042] mmc1: Controller never released inhibit bit(s).
[   40.991697] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   40.991718] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   40.991731] mmc-bcm2835 20300000.mmc: no support for card's volts
[   40.991739] mmc1: error -22 whilst initialising MMC card
[   41.063007] mmc1: Controller never released inhibit bit(s).
[   41.103825] mmc1: Controller never released inhibit bit(s).
[   41.103862] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   41.175350] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   41.175370] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   41.186463] mmc1: Controller never released inhibit bit(s).
[   41.223434] mmc1: Controller never released inhibit bit(s).
[   41.223473] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   64.315611] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   64.315638] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   64.326881] mmc1: Controller never released inhibit bit(s).
[   68.512607] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   68.512634] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   68.522829] mmc1: Controller never released inhibit bit(s).
[   87.883158] usb 1-1: USB disconnect, device number 2
[   88.093079] Indeed it is in host mode hprt0 = 00021501
[   88.292897] usb 1-1: new high-speed USB device number 3 using dwc_otg
[   88.293312] Indeed it is in host mode hprt0 = 00001101
[   88.523801] usb 1-1: New USB device found, idVendor=22b8, idProduct=2e24
[   88.523818] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   88.523825] usb 1-1: Product: Moto G 2014
[   88.523831] usb 1-1: Manufacturer: motorola
[   88.523838] usb 1-1: SerialNumber: ZX1D224W7T
[   88.649066] usbcore: registered new interface driver cdc_ether
[   88.674858] rndis_host 1-1:1.0 usb0: register 'rndis_host' at usb-20980000.usb-1, RNDIS device, 76:de:60:8d:ec:30
[   88.675627] usbcore: registered new interface driver rndis_host
[   88.800792] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   88.810921] mmc1: Controller never released inhibit bit(s).
[   88.888727] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   88.888749] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   88.901035] mmc1: Controller never released inhibit bit(s).
[   88.927521] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   88.937647] mmc1: Controller never released inhibit bit(s).
[   89.005463] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   89.005485] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   89.016641] mmc1: Controller never released inhibit bit(s).
[   89.044125] mmc-bcm2835 20300000.mmc: no support for card's volts
[   89.044148] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   89.044167] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   89.044179] mmc1: error -22 whilst initialising SDIO card
[   89.054290] mmc1: Controller never released inhibit bit(s).
[   89.088891] mmc-bcm2835 20300000.mmc: no support for card's volts
[   89.088911] mmc1: error -22 whilst initialising MMC card
[   90.193126] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   90.233066] mmc1: Controller never released inhibit bit(s).
[   90.431101] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   90.431126] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   90.431145] mmc-bcm2835 20300000.mmc: no support for card's volts
[   90.431158] mmc1: error -22 whilst initialising MMC card
[   90.493085] mmc1: Controller never released inhibit bit(s).
[   94.548548] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   94.548574] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[   94.560892] mmc1: Controller never released inhibit bit(s).
[  125.915332] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  125.926451] mmc1: Controller never released inhibit bit(s).
[  126.015331] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  126.015351] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  126.026439] mmc1: Controller never released inhibit bit(s).
[  126.062977] mmc1: Controller never released inhibit bit(s).
[  126.063016] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  127.358495] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  127.358517] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  127.370720] mmc1: Controller never released inhibit bit(s).
[  127.458793] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  127.458813] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  127.471028] mmc1: Controller never released inhibit bit(s).
[  128.795252] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  128.806372] mmc1: Controller never released inhibit bit(s).
[  128.834612] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  128.834632] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  128.844743] mmc1: Controller never released inhibit bit(s).
[  128.925356] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  128.925376] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  128.936469] mmc1: Controller never released inhibit bit(s).
[  128.957144] mmc-bcm2835 20300000.mmc: no support for card's volts
[  128.957165] mmc1: error -22 whilst initialising SDIO card
[  128.967275] mmc1: Controller never released inhibit bit(s).
[  128.967304] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  128.987505] mmc-bcm2835 20300000.mmc: no support for card's volts
[  128.987527] mmc1: error -22 whilst initialising MMC card
[  130.033091] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  130.073025] mmc1: Controller never released inhibit bit(s).
[  130.192290] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  130.192309] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  130.192322] mmc-bcm2835 20300000.mmc: no support for card's volts
[  130.192333] mmc1: error -22 whilst initialising MMC card
[  130.263030] mmc1: Controller never released inhibit bit(s).
[  130.285336] mmc-bcm2835 20300000.mmc: no support for card's volts
[  130.285359] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  130.285379] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  130.285392] mmc1: error -22 whilst initialising SDIO card
[  130.295501] mmc1: Controller never released inhibit bit(s).
[  130.317443] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  130.327559] mmc1: Controller never released inhibit bit(s).
[  130.405387] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  130.405408] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  130.416478] mmc1: Controller never released inhibit bit(s).
[  130.437044] mmc-bcm2835 20300000.mmc: no support for card's volts
[  130.437066] mmc1: error -22 whilst initialising SDIO card
[  130.447176] mmc1: Controller never released inhibit bit(s).
[  130.447204] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  130.467628] mmc-bcm2835 20300000.mmc: no support for card's volts
[  130.467649] mmc1: error -22 whilst initialising MMC card
[  131.553119] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  131.593045] mmc1: Controller never released inhibit bit(s).
[  131.785265] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  131.785285] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  131.796460] mmc1: Controller never released inhibit bit(s).
[  131.850743] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  131.850765] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  131.860875] mmc1: Controller never released inhibit bit(s).
[  131.955378] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  131.955398] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  131.966488] mmc1: Controller never released inhibit bit(s).
[  131.987371] mmc-bcm2835 20300000.mmc: no support for card's volts
[  131.987389] mmc1: error -22 whilst initialising SDIO card
[  131.997499] mmc1: Controller never released inhibit bit(s).
[  131.997529] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  132.019156] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  132.019177] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  132.029291] mmc1: Controller never released inhibit bit(s).
[  133.348402] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  133.348422] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  133.360638] mmc1: Controller never released inhibit bit(s).
[  133.403811] mmc1: Controller never released inhibit bit(s).
[  133.403850] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  133.485357] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  133.485377] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  133.496471] mmc1: Controller never released inhibit bit(s).
[  133.546354] mmc1: Controller never released inhibit bit(s).
[  133.546393] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  134.875257] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  134.886376] mmc1: Controller never released inhibit bit(s).
[  134.928334] mmc1: Controller never released inhibit bit(s).
[  134.928371] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  135.005369] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  135.005390] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  135.016479] mmc1: Controller never released inhibit bit(s).
[  135.037352] mmc-bcm2835 20300000.mmc: no support for card's volts
[  135.037372] mmc1: error -22 whilst initialising SDIO card
[  135.047483] mmc1: Controller never released inhibit bit(s).
[  135.047511] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  135.067503] mmc-bcm2835 20300000.mmc: no support for card's volts
[  135.067525] mmc1: error -22 whilst initialising MMC card
[  136.113113] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  136.153048] mmc1: Controller never released inhibit bit(s).
[  136.338456] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  136.338478] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  136.350682] mmc1: Controller never released inhibit bit(s).
[  136.402078] mmc-bcm2835 20300000.mmc: no support for card's volts
[  136.402108] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  136.402122] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  136.402133] mmc1: error -22 whilst initialising MMC card
[  136.472962] mmc1: Controller never released inhibit bit(s).
[  140.555539] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  140.555567] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  140.566743] mmc1: Controller never released inhibit bit(s).
[  140.585811] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  140.585836] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  140.585859] mmc-bcm2835 20300000.mmc: no support for card's volts
[  140.585907] mmc1: error -22 whilst initialising SDIO card
[  140.596084] mmc1: Controller never released inhibit bit(s).
[  140.624331] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  140.624355] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  140.634534] mmc1: Controller never released inhibit bit(s).
[  141.920506] mmc-bcm2835 20300000.mmc: no support for card's volts
[  141.920531] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  141.920550] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  141.920562] mmc1: error -22 whilst initialising SDIO card
[  141.930671] mmc1: Controller never released inhibit bit(s).
[  141.952879] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  141.952899] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  141.963151] mmc1: Controller never released inhibit bit(s).
[  143.435532] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  143.435558] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  143.446738] mmc1: Controller never released inhibit bit(s).
[  143.484241] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  143.484269] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  143.494442] mmc1: Controller never released inhibit bit(s).
[  147.605344] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  147.605363] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  147.616455] mmc1: Controller never released inhibit bit(s).
[  147.632372] mmc-bcm2835 20300000.mmc: no support for card's volts
[  147.632393] mmc1: error -22 whilst initialising SDIO card
[  147.642503] mmc1: Controller never released inhibit bit(s).
[  147.642530] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  147.665651] mmc-bcm2835 20300000.mmc: no support for card's volts
[  147.665672] mmc1: error -22 whilst initialising MMC card
[  148.753074] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  148.793081] mmc1: Controller never released inhibit bit(s).
[  166.713296] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  166.713316] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  166.724405] mmc1: Controller never released inhibit bit(s).
[  166.740892] mmc-bcm2835 20300000.mmc: no support for card's volts
[  166.740912] mmc1: error -22 whilst initialising SDIO card
[  166.740938] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  166.740952] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  166.751060] mmc1: Controller never released inhibit bit(s).
[  166.773701] mmc-bcm2835 20300000.mmc: no support for card's volts
[  166.773722] mmc1: error -22 whilst initialising MMC card
[  167.870863] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  167.910836] mmc1: Controller never released inhibit bit(s).
[  190.025071] mmc1: Controller never released inhibit bit(s).
[  190.025122] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  357.007024] mmc1: Controller never released inhibit bit(s).
[  357.007073] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  359.795905] mmc1: Controller never released inhibit bit(s).
[  359.795956] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  363.950705] mmc1: Controller never released inhibit bit(s).
[  363.950743] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  365.367745] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  365.367767] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  365.379972] mmc1: Controller never released inhibit bit(s).
[  368.252464] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  368.252490] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  368.263657] mmc1: Controller never released inhibit bit(s).
[  368.283214] mmc-bcm2835 20300000.mmc: no support for card's volts
[  368.283244] mmc1: error -22 whilst initialising SDIO card
[  368.283266] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  368.293449] mmc1: Controller never released inhibit bit(s).
[  368.314582] mmc-bcm2835 20300000.mmc: no support for card's volts
[  368.314609] mmc1: error -22 whilst initialising MMC card
[  368.314631] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  368.314647] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  369.439163] mmc1: Controller never released inhibit bit(s).
[  384.566288] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  384.576476] mmc1: Controller never released inhibit bit(s).
[  429.490730] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  429.490756] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  429.503104] mmc1: Controller never released inhibit bit(s).
[  429.537069] mmc-bcm2835 20300000.mmc: no support for card's volts
[  429.537092] mmc1: error -22 whilst initialising MMC card
[  430.644568] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  430.684530] mmc1: Controller never released inhibit bit(s).
[  430.869525] mmc1: Controller never released inhibit bit(s).
[  430.869575] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  456.867640] mmc1: Controller never released inhibit bit(s).
[  456.867691] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  653.091407] mmc1: Controller never released inhibit bit(s).
[  653.091456] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  665.245374] mmc1: Controller never released inhibit bit(s).
[  665.245422] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  672.018540] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  672.018565] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  672.030883] mmc1: Controller never released inhibit bit(s).
[  672.070872] mmc1: Controller never released inhibit bit(s).
[  672.070920] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  684.470813] mmc-bcm2835 20300000.mmc: no support for card's volts
[  684.470840] mmc1: error -22 whilst initialising MMC card
[  684.470866] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  684.470880] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  685.548891] mmc1: Controller never released inhibit bit(s).
[  689.963153] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  689.963179] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  689.974462] mmc1: Controller never released inhibit bit(s).
[  690.016911] mmc1: Controller never released inhibit bit(s).
[  690.016948] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  695.388570] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  695.388595] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  695.400912] mmc1: Controller never released inhibit bit(s).
[  695.439641] mmc1: Controller never released inhibit bit(s).
[  695.439690] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  698.199681] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  698.199701] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  698.211905] mmc1: Controller never released inhibit bit(s).
[  698.251240] mmc1: Controller never released inhibit bit(s).
[  698.251279] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  698.326639] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  698.326660] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  698.337739] mmc1: Controller never released inhibit bit(s).
[  698.360663] mmc-bcm2835 20300000.mmc: no support for card's volts
[  698.360684] mmc1: error -22 whilst initialising SDIO card
[  698.370793] mmc1: Controller never released inhibit bit(s).
[  698.370820] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  698.392879] mmc-bcm2835 20300000.mmc: no support for card's volts
[  698.392902] mmc1: error -22 whilst initialising MMC card
[  699.434903] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  699.474921] mmc1: Controller never released inhibit bit(s).
[  699.727408] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  699.727433] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  699.738608] mmc1: Controller never released inhibit bit(s).
[  699.782457] mmc1: Controller never released inhibit bit(s).
[  699.782493] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  703.798485] mmc-bcm2835 20300000.mmc: no support for card's volts
[  703.798510] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  703.798530] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  703.798545] mmc1: error -22 whilst initialising SDIO card
[  703.808653] mmc1: Controller never released inhibit bit(s).
[  705.242597] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  705.242618] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  705.254840] mmc1: Controller never released inhibit bit(s).
[  705.292261] mmc1: Controller never released inhibit bit(s).
[  705.292300] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  710.675184] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  710.675209] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  710.687528] mmc1: Controller never released inhibit bit(s).
[  710.727050] mmc1: Controller never released inhibit bit(s).
[  710.727088] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  716.224036] mmc1: Controller never released inhibit bit(s).
[  716.224076] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  721.669209] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  721.669229] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  721.679339] mmc1: Controller never released inhibit bit(s).
[  724.441100] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  724.441120] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  724.453325] mmc1: Controller never released inhibit bit(s).
[  724.515775] mmc1: Controller never released inhibit bit(s).
[  724.515813] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  724.598028] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  724.598048] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  724.609160] mmc1: Controller never released inhibit bit(s).
[  724.630029] mmc-bcm2835 20300000.mmc: no support for card's volts
[  724.630050] mmc1: error -22 whilst initialising SDIO card
[  724.640159] mmc1: Controller never released inhibit bit(s).
[  724.640187] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  724.660260] mmc-bcm2835 20300000.mmc: no support for card's volts
[  724.660281] mmc1: error -22 whilst initialising MMC card
[  725.766267] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  725.806258] mmc1: Controller never released inhibit bit(s).
[  741.095365] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  741.095392] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  741.106571] mmc1: Controller never released inhibit bit(s).
[  746.525095] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  746.536212] mmc1: Controller never released inhibit bit(s).
[  746.572422] mmc1: Controller never released inhibit bit(s).
[  746.572460] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  772.524667] mmc1: Controller never released inhibit bit(s).
[  772.524719] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  777.929133] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  777.929158] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  777.929173] mmc-bcm2835 20300000.mmc: no support for card's volts
[  777.929184] mmc1: error -22 whilst initialising MMC card
[  777.994639] mmc1: Controller never released inhibit bit(s).
[  778.020628] mmc-bcm2835 20300000.mmc: no support for card's volts
[  778.020656] mmc1: error -22 whilst initialising SDIO card
[  778.020680] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  778.030864] mmc1: Controller never released inhibit bit(s).
[  778.057484] mmc-bcm2835 20300000.mmc: no support for card's volts
[  778.057505] mmc1: error -22 whilst initialising MMC card
[  779.144044] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  779.184018] mmc1: Controller never released inhibit bit(s).
[  804.014881] mmc-bcm2835 20300000.mmc: no support for card's volts
[  804.014908] mmc1: error -22 whilst initialising MMC card
[  804.014934] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  804.014949] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  805.091974] mmc1: Controller never released inhibit bit(s).
[  805.286587] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  805.286607] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  805.296717] mmc1: Controller never released inhibit bit(s).
[  809.505664] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  809.505692] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  809.518034] mmc1: Controller never released inhibit bit(s).
[  809.558050] mmc1: Controller never released inhibit bit(s).
[  809.558088] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  814.971326] mmc1: Controller never released inhibit bit(s).
[  814.971375] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  820.459461] mmc-bcm2835 20300000.mmc: no support for card's volts
[  820.459486] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  820.459541] mmc1: error -22 whilst initialising SDIO card
[  820.469667] mmc1: Controller never released inhibit bit(s).
[  820.494567] mmc-bcm2835 20300000.mmc: no support for card's volts
[  820.494595] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  820.494606] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  820.494623] mmc1: error -22 whilst initialising MMC card
[  820.558351] mmc1: Controller never released inhibit bit(s).
[  830.170291] mmc-bcm2835 20300000.mmc: no support for card's volts
[  830.170319] mmc1: error -22 whilst initialising MMC card
[  830.170341] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  830.170359] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  831.261314] mmc1: Controller never released inhibit bit(s).
[  835.663979] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  835.664007] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  835.675172] mmc1: Controller never released inhibit bit(s).
[  835.721858] mmc1: Controller never released inhibit bit(s).
[  835.721910] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  841.106909] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  841.106935] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  841.119253] mmc1: Controller never released inhibit bit(s).
[  841.159719] mmc1: Controller never released inhibit bit(s).
[  841.159769] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  850.816316] mmc1: Controller never released inhibit bit(s).
[  850.816365] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  856.156653] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  856.166841] mmc1: Controller never released inhibit bit(s).
[  868.320481] mmc1: Controller never released inhibit bit(s).
[  868.320518] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  872.618155] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  872.618180] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  872.629353] mmc1: Controller never released inhibit bit(s).
[  872.672032] mmc1: Controller never released inhibit bit(s).
[  872.672069] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  878.062437] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  878.062462] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  878.074780] mmc1: Controller never released inhibit bit(s).
[  878.107686] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  878.107711] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  878.117894] mmc1: Controller never released inhibit bit(s).
[  883.593806] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  883.593827] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  883.603937] mmc1: Controller never released inhibit bit(s).
[  920.426546] mmc-bcm2835 20300000.mmc: no support for card's volts
[  920.426590] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  920.426607] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  920.426620] mmc1: error -22 whilst initialising MMC card
[  921.504116] mmc1: Controller never released inhibit bit(s).
[  925.916383] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  925.916408] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  925.927588] mmc1: Controller never released inhibit bit(s).
[  925.959555] mmc-bcm2835 20300000.mmc: no support for card's volts
[  925.959577] mmc1: error -22 whilst initialising SDIO card
[  925.969689] mmc1: Controller never released inhibit bit(s).
[  925.969717] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  925.999343] mmc1: Controller never released inhibit bit(s).
[  925.999382] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  931.349178] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  931.349202] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  931.361521] mmc1: Controller never released inhibit bit(s).
[  931.394547] mmc-bcm2835 20300000.mmc: no support for card's volts
[  931.394572] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  931.394591] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  931.394604] mmc1: error -22 whilst initialising MMC card
[  931.463639] mmc1: Controller never released inhibit bit(s).
[  951.944248] mmc-bcm2835 20300000.mmc: no support for card's volts
[  951.944293] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  951.944309] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  951.944323] mmc1: error -22 whilst initialising MMC card
[  953.021744] mmc1: Controller never released inhibit bit(s).
[  957.433580] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  957.433606] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  957.444772] mmc1: Controller never released inhibit bit(s).
[  957.488953] mmc1: Controller never released inhibit bit(s).
[  957.488990] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  962.942856] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  962.942880] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  962.954046] mmc1: Controller never released inhibit bit(s).
[  962.996494] mmc1: Controller never released inhibit bit(s).
[  962.996531] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  968.375155] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  968.375181] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  968.387501] mmc1: Controller never released inhibit bit(s).
[  968.416946] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  968.416967] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  968.427076] mmc1: Controller never released inhibit bit(s).
[  988.979172] mmc1: Controller never released inhibit bit(s).
[  988.979221] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  994.400209] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  994.410396] mmc1: Controller never released inhibit bit(s).
[  994.490904] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  994.490924] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  994.503134] mmc1: Controller never released inhibit bit(s).
[  999.895888] mmc-bcm2835 20300000.mmc: no support for card's volts
[  999.895915] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  999.895935] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  999.895948] mmc1: error -22 whilst initialising SDIO card
[  999.906057] mmc1: Controller never released inhibit bit(s).
[  999.932051] mmc-bcm2835 20300000.mmc: no support for card's volts
[  999.932075] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  999.932094] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[  999.932107] mmc1: error -22 whilst initialising MMC card
[  999.994741] mmc1: Controller never released inhibit bit(s).
[ 1009.668897] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1009.668922] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1009.681268] mmc1: Controller never released inhibit bit(s).
[ 1009.713067] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1009.723260] mmc1: Controller never released inhibit bit(s).
[ 1015.117450] mmc1: Controller never released inhibit bit(s).
[ 1015.117500] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1053.241060] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1053.241080] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1053.253284] mmc1: Controller never released inhibit bit(s).
[ 1057.461938] mmc1: Controller never released inhibit bit(s).
[ 1057.461987] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1062.926524] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1062.926550] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1062.937717] mmc1: Controller never released inhibit bit(s).
[ 1062.985717] mmc1: Controller never released inhibit bit(s).
[ 1062.985755] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1068.379890] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1068.390009] mmc1: Controller never released inhibit bit(s).
[ 1073.798174] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1073.798200] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1073.810522] mmc1: Controller never released inhibit bit(s).
[ 1073.849638] mmc1: Controller never released inhibit bit(s).
[ 1073.849676] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1092.945753] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1092.945773] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1092.955883] mmc1: Controller never released inhibit bit(s).
[ 1094.385294] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1094.395482] mmc1: Controller never released inhibit bit(s).
[ 1099.891298] mmc-bcm2835 20300000.mmc: no support for card's volts
[ 1099.891324] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1099.891345] mmc1: error -22 whilst initialising SDIO card
[ 1099.901455] mmc1: Controller never released inhibit bit(s).
[ 1104.172040] mmc-bcm2835 20300000.mmc: no support for card's volts
[ 1104.172085] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1104.172101] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1104.172118] mmc1: error -22 whilst initialising MMC card
[ 1105.319532] mmc1: Controller never released inhibit bit(s).
[ 1109.634358] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1109.634383] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1109.646702] mmc1: Controller never released inhibit bit(s).
[ 1109.685175] mmc1: Controller never released inhibit bit(s).
[ 1109.685214] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1135.677641] mmc-bcm2835 20300000.mmc: no support for card's volts
[ 1135.677669] mmc1: error -22 whilst initialising MMC card
[ 1135.677691] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1136.755058] mmc1: Controller never released inhibit bit(s).
[ 1136.930382] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1136.930403] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1136.942620] mmc1: Controller never released inhibit bit(s).
[ 1141.156761] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1141.156789] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1141.167969] mmc1: Controller never released inhibit bit(s).
[ 1141.194887] mmc-bcm2835 20300000.mmc: no support for card's volts
[ 1141.194910] mmc1: error -22 whilst initialising SDIO card
[ 1141.205020] mmc1: Controller never released inhibit bit(s).
[ 1141.205050] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1141.231481] mmc1: Controller never released inhibit bit(s).
[ 1141.231519] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1146.619015] mmc1: Controller never released inhibit bit(s).
[ 1146.619066] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1171.254352] mmc1: Controller never released inhibit bit(s).
[ 1171.254384] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1172.671843] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1172.671871] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1172.683050] mmc1: Controller never released inhibit bit(s).
[ 1172.706489] mmc-bcm2835 20300000.mmc: no support for card's volts
[ 1172.706510] mmc1: error -22 whilst initialising SDIO card
[ 1172.716619] mmc1: Controller never released inhibit bit(s).
[ 1172.716647] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1172.743557] mmc1: Controller never released inhibit bit(s).
[ 1172.743594] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1173.967427] mmc1: Controller never released inhibit bit(s).
[ 1173.967464] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1174.044701] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1174.044721] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1174.056925] mmc1: Controller never released inhibit bit(s).
[ 1174.099826] mmc1: Controller never released inhibit bit(s).
[ 1174.099864] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1174.181427] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1174.181446] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1174.192536] mmc1: Controller never released inhibit bit(s).
[ 1174.213446] mmc-bcm2835 20300000.mmc: no support for card's volts
[ 1174.213467] mmc1: error -22 whilst initialising SDIO card
[ 1174.223577] mmc1: Controller never released inhibit bit(s).
[ 1174.223605] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1174.243846] mmc-bcm2835 20300000.mmc: no support for card's volts
[ 1174.243868] mmc1: error -22 whilst initialising MMC card
[ 1175.348985] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1175.388957] mmc1: Controller never released inhibit bit(s).
[ 1198.787695] mmc-bcm2835 20300000.mmc: no support for card's volts
[ 1198.787735] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1198.787751] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1198.787765] mmc1: error -22 whilst initialising MMC card
[ 1199.865091] mmc1: Controller never released inhibit bit(s).
[ 1204.276778] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1204.276803] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1204.287974] mmc1: Controller never released inhibit bit(s).
[ 1204.308165] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1204.308193] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1204.308378] mmc-bcm2835 20300000.mmc: no support for card's volts
[ 1204.308396] mmc1: error -22 whilst initialising SDIO card
[ 1204.318574] mmc1: Controller never released inhibit bit(s).
[ 1209.722423] mmc-bcm2835 20300000.mmc: no support for card's volts
[ 1209.722448] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1209.722467] mmc1: Got command interrupt 0x00030000 even though no command operation was in progress.
[ 1209.722480] mmc1: error -22 whilst initialising MMC card
[ 1209.793405] mmc1: Controller never released inhibit bit(s).

